Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Maruyama, Shuhei; Yamamoto, Akio*; Endo, Tomohiro*
Annals of Nuclear Energy, 205, p.110591_1 - 110591_13, 2024/09
Kamikawa, Yutaka; Suzuki, Makoto; Agake, Toshiki; Murakami, Takahiko; Morita, Yusuke; Shiina, Hidenori; Fukushima, Manabu; Hirane, Nobuhiko; Ouchi, Yasuhiro
JAEA-Technology 2023-030, 57 Pages, 2024/03
JAEA-Technology-2023-030.pdf:1.93MB
Owing to the publication of the latest data about aircraft crashes by Nuclear Regulation Authority (NRA), it was necessary to re-evaluate the probabilities of aircraft crashes for Nuclear Science Research Institute (NSRI). By using of the assessment method provided in "Regulatory Guide of the Assessment Standard for Probability of Airplane Crash on a Nuclear Power Reactor Facility", we re-evaluated the probabilities of aircraft crashes against the nuclear facilities in NSRI. As a result of the evaluations, the sum of the probabilities of aircraft crashes against Waste Treatment Facilities (maximum probability among all nuclear facilities in NSRI) is 5.68
10
(times/(reactor 
year)) which is lower than 10
(times/(reactor year)) that is the assessment criterion whether aircraft crashes is considered to be "anticipated external human induced events" in design basis or not.
Watanabe, Seiya*; Kawahara, Jun*; Aoki, Takayuki*; Sugihara, Kenta; Takase, Shinsuke*; Moriguchi, Shuji*; Hashimoto, Hirotada*
Engineering Applications of Computational Fluid Mechanics, 17(1), p.2211143_1 - 2211143_23, 2023/00
Times Cited Count：1 Percentile：56.82(Engineering, Multidisciplinary)In tsunami inundations or slope disasters of heavy rain, a lot of floating debris or driftwood logs are included in the flows. The damage to structures from solid body impacts is more severe than the damage from the water pressure. In order to study free-surface flows that include floating debris, developing a high-accurate simulation code of free-surface flows with high performance for large-scale computations is desired. We propose the single-phase free-surface flow model based on the cumulant lattice Boltzmann method coupled with a particle-based rigid body simulation. The discrete element method calculates the contact interaction between solids. An octree-based AMR (Adaptive Mesh Refinement) method is introduced to improve computational accuracy and time-to-solution. High-resolution grids are assigned near the free surfaces and solid boundaries. We conducted two kinds of tsunami flow experiments in the 15 and 70 m water tanks at Hachinohe Institute of Technology and Kobe University to validate the accuracy of the proposed model. The simulation results have shown good agreement with the experiments for the drifting speed, the number of trapped wood pieces, and the stacked angles.
Ichihara, Yoshitaka*; Nakamura, Naohiro*; Moritani, Hiroshi*; Horiguchi, Tomohiro*; Choi, B.
Nihon Genshiryoku Gakkai Wabun Rombunshi, 21(1), p.1 - 14, 2022/03
In this study, we aim to approximately evaluate the effect of nonlinearity of reinforced concrete structures through seismic response analysis using the equivalent linear analysis method. A simulation analysis was performed for the ultimate response test of the shear wall of the reactor building used in an international competition by OECD/NEA in 1996. The equivalent stiffness and damping of the shear wall were obtained from the trilinear skeleton curves proposed by the Japan Electric Association and the hysteresis curves proposed by Cheng et al. The dominant frequency, maximum acceleration response, maximum displacement response, inertia force-displacement relationship, and acceleration response spectra of the top slab could be simulated well up to a shear strain of approximately 
=2.010
. The equivalent linear analysis used herein underestimates the maximum displacement response at the time of ultimate fracture of approximately =4.010. Moreover, the maximum shear strain of the shear wall could not capture the locally occurring shear strain compared with that of the nonlinear analysis. Therefore, when employing this method to evaluate the maximum shear strain and test results, including those during the sudden increase in displacement immediately before the fracture, sufficient attention must be paid to its applicability.
Hasegawa, Yuta; Imamura, Toshiyuki*; Ina, Takuya; Onodera, Naoyuki; Asahi, Yuichi; Idomura, Yasuhiro
Proceedings of 13th Workshop on Latest Advances in Scalable Algorithms for Large-Scale Heterogeneous Systems (ScalAH22) (Internet), p.10 - 17, 2022/00
The ensemble data assimilation of computational fluid dynamics simulations based on the lattice Boltzmann method (LBM) and the local ensemble transform Kalman filter (LETKF) is implemented and optimized on a GPU supercomputer based on NVIDIA A100 GPUs. To connect the LBM and LETKF parts, data transpose communication is optimized by overlapping computation, file I/O, and communication based on data dependency in each LETKF kernel. In two dimensional forced isotropic turbulence simulations with the ensemble size of 
and the number of grid points of 
, the optimized implementation achieved 
speedup from the naive implementation, in which the LETKF part is not parallelized. The main computing kernel of the local problem is the eigenvalue decomposition (EVD) of 
real symmetric dense matrices, which is computed by a newly developed batched EVD in EigenG. The batched EVD in EigenG outperforms that in cuSolver, and 
speedup was achieved.
Hasegawa, Yuta; Aoki, Takayuki*; Kobayashi, Hiromichi*; Idomura, Yasuhiro; Onodera, Naoyuki
Parallel Computing, 108, p.102851_1 - 102851_12, 2021/12
Times Cited Count：3 Percentile：42.85(Computer Science, Theory & Methods)The aerodynamics simulation code based on the lattice Boltzmann method (LBM) using forest-of-octrees-based block-structured local mesh refinement (LMR) was implemented, and its performance was evaluated on GPU-based supercomputers. We found that the conventional Space-Filling-Curve-based (SFC) domain partitioning algorithm results in costly halo communication in our aerodynamics simulations. Our new tree cutting approach improved the locality and the topology of the partitioned sub-domains and reduced the communication cost to one-third or one-fourth of the original SFC approach. In the strong scaling test, the code achieved maximum 
speedup at the performance of 2207 MLUPS (mega- lattice update per second) on 128 GPUs. In the weak scaling test, the code achieved 9620 MLUPS at 128 GPUs with 4.473 billion grid points, while the parallel efficiency was 93.4% from 8 to 128 GPUs.
Hirota, Noriaki; Shibata, Hiroshi; Takeuchi, Tomoaki; Otsuka, Noriaki; Tsuchiya, Kunihiko
Journal of Nuclear Science and Technology, 57(12), p.1276 - 1286, 2020/12
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)The influence of materials of mineral-insulated (MI) cables on their electrical characteristics upon exposure to high-temperature conditions was examined via a transmission test, in the objective of achieving the stability of the potential distribution along the cable length. Occurrence of a voltage drop along the cable was confirmed for aluminum oxide (Al
O
) and magnesium oxide (MgO), as insulating materials of the MI cable. A finite-element method (FEM)-based analysis was performed to evaluate the leakage in the potentials, which was found at the terminal end. Voltage drop yields by the transmission test and the analysis were in good agreement for the MI cable of AlO and MgO materials, which suggests the reproducibility of the magnitude relationship of the experimental results via the FEM analysis. To suppress the voltage drop, the same FEM analysis was conducted, the diameter of the core wires (
) and the distance between them (
) were varied. Considering the variation of , the potential distribution in the MI cable produced a minimum voltage drop corresponding to a ratio 
of 0.35, obtained by dividing with that of the insulating material (
). In case of varying , a minimum voltage drop was l/ of 0.5.
Sugita, Yutaka; Taniguchi, Naoki; Makino, Hitoshi; Kanamaru, Shinichiro*; Okumura, Taisei*
Nihon Genshiryoku Gakkai Wabun Rombunshi, 19(3), p.121 - 135, 2020/09
A series of structural analysis of disposal containers for direct disposal of spent fuel was carried out to provide preliminary estimates of the required pressure resistance thickness of the disposal container. Disposal containers were designed to contain either 2, 3 or 4 spent fuel assemblies in linear, triangular or square arrangements, respectively. The required pressure resistance thickness was evaluated using separation distance of the housing space for each spent fuel assembly as a key model parameter to obtain the required thickness of the body and then the lid of the disposal container. This work also provides additional analytical technical knowledge, such as the validity of the setting of the stress evaluation line and the effect of the model length on the analysis. These can then be referred to and used again in the future as a basis for conducting similar evaluations under different conditions or proceeding with more detailed evaluations.
Toguri, Satohito*; Yahagi, Ryoji*; Okihara, Mitsunobu*; Takeuchi, Nobumitsu*; Kurosaki, Hiromi*; Matsui, Hiroya
JAEA-Technology 2018-017, 161 Pages, 2019/03
JAEA-Technology-2018-017.pdf:28.26MB
The Japan Atomic Energy Agency has been conducting research on three critical issues for development of: engineering techniques for underground construction, modelling techniques of mass transfer and tunnel backfilling methods at the Mizunami Underground Research Laboratory on the basis of Medium to Long-Term Plan of Japan Atomic Energy Agency. This report describes the overall plan of in-situ test to backfill a part of Mizunami Underground Research Laboratory, which is planned for "development of tunnel backfilling method".
Yoshida, Hiroyuki; Uesawa, Shinichiro; Horiguchi, Naoki; Miyahara, Naoya; Ose, Yasuo*
Proceedings of 11th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-11) (Internet), 6 Pages, 2018/11
Morita, Koji*; Ogawa, Ryusei*; Tokioka, Hiromi*; Liu, X.*; Liu, W.*; Kamiyama, Kenji
Proceedings of 12th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-12) (USB Flash Drive), 11 Pages, 2018/10
The EAGLE in-pile ID1 test has been performed by Japan Atomic Energy Agency to demonstrate early fuel discharge from a fuel subassembly with an inner duct structure, which is named FAIDUS. It was deduced that early duct wall failure observed in the test was initiated by high heat flux from the molten pool of fuel and steel mixture. The posttest analyses suggest that molten pool-to-duct wall heat transfer might be enhanced effectively by the molten steel with large thermal conductivity in the pool without the presence of fuel crust on the duct wall. In this study, mechanisms of heat transfer from the molten pool to the duct wall was analyzed using a fully Lagrangian approach based on the finite volume particle method for multi-component, multi-phase flows. A series of pin disruption, molten pool formation and duct wall failure behaviors was simulated to investigate mixing and separation behavior of molten steel and fuel in the pool, and their effect on molten pool-to-duct wall heat transfer. The present 2D particle-based simulations demonstrated that large thermal load beyond 10 MW/m
on the duct wall was caused by effective heat transfer due to direct contact of liquid fuel with nuclear heat to the duct wall.
Iwamoto, Hiroki; Nishihara, Kenji; Yagi, Takahiro*; Pyeon, C.-H.*
Journal of Nuclear Science and Technology, 54(4), p.432 - 443, 2017/04
Times Cited Count：20 Percentile：88.37(Nuclear Science & Technology)Horiguchi, Naoki; Yoshida, Hiroyuki; Abe, Yutaka*
Nuclear Engineering and Design, 310, p.580 - 586, 2016/12
Times Cited Count：9 Percentile：64.39(Nuclear Science & Technology)Yano, Naomine*; Yamada, Taro*; Hosoya, Takaaki*; Ohara, Takashi; Tanaka, Ichiro*; Kusaka, Katsuhiro*
Scientific Reports (Internet), 6, p.36628_1 - 36628_9, 2016/12
Times Cited Count：11 Percentile：61.23(Multidisciplinary Sciences)Nakajima, Norihiro; Nishida, Akemi; Miyamura, Hiroko; Iigaki, Kazuhiko; Sawa, Kazuhiro
Kashika Joho Gakkai-Shi (USB Flash Drive), 36(Suppl.2), 4 Pages, 2016/10
Since nuclear power plants have dimensions approximately 100m
and their structures are an assembly made up of over 10 million components, it is not convenient to experimentally analyze its behavior under strong loads of earthquakes, due to the complexity and hugeness of plants. The proposed system performs numerical simulations to evaluate the behaviors of an assembly like a nuclear facility. The paper discusses how to carry out visual analysis for assembly such as nuclear power plants. In a result discussion, a numerical experiment was carried out with a numerical model of High Temperature engineering Test Reactor of Japan Atomic Energy Agency and its result was compared with observed data. A good corresponding among them was obtained as a structural analysis of an assembly by using visualization. As a conclusion, a visual analytics methodology for assembly is discussed.
Nakajima, Norihiro; Nishida, Akemi; Kawakami, Yoshiaki; Suzuki, Yoshio; Sawa, Kazuhiro; Iigaki, Kazuhiko
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 5 Pages, 2015/05
A numerical analysis controlling and managing system is implemented on K, which controls the modelling process and data treating, although the manager only controls a structural analysis by finite element method. The modeling process is described by the list of function ID and its procedures in a data base. The manager executes the process by order in the list for simulation procedures. The manager controls the intention of an analysis by changing the analytical process one to another. Experiments were carried out with static and dynamic analyses.
Kato, Yuki; Yoshida, Hiroyuki; Yokoyama, Ryotaro*; Kanagawa, Tetsuya*; Kaneko, Akiko*; Monji, Hideaki*; Abe, Yutaka*
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 8 Pages, 2015/05
Yoshida, Hiroyuki; Nagatake, Taku; Takase, Kazuyuki; Kaneko, Akiko*; Monji, Hideaki*; Abe, Yutaka*
Mechanical Engineering Journal (Internet), 1(4), p.TEP0025_1 - TEP0025_11, 2014/08
N-bearing grapheneWang, X.*; Hou, Z.*; Ikeda, Takashi; Terakura, Kiyoyuki*
Journal of Physical Chemistry C, 118(25), p.13929 - 13935, 2014/06
Times Cited Count：10 Percentile：33.1(Chemistry, Physical)The NMR chemical shifts of possible N-containing moieties at edges and defects of graphene are investigated by using the first-principles method. Our computations show that pyridine-like and graphite-like N are rather easily identifiable using N NMR technique, in agreement with experiment. On the other hand, pyridinium-like N is hardly distinguished from pyrrole-like one because these N nuclei give nearly overlapping signals. However, our simulations suggest that 
H NMR is useful to discriminate between them; The NMR chemical shift of H directly bonded with pyridinium-like and pyrrole-like N is estimated as 0.8 and 10.8 ppm, respectively. The N NMR signals for various moieties at edges we considered are found to be similar to the corresponding ones at defects except for pyridine-like nitrogens. Conversely, the N NMR chemical shifts are altered sensitively by the degree of aggregation of pyridine-like N atoms both along armchair edges and at defect sites.
Nakashima, Hiroshi; Nakane, Yoshihiro; Masukawa, Fumihiro; Matsuda, Norihiro; Oguri, Tomomi*; Nakano, Hideo*; Sasamoto, Nobuo*; Shibata, Tokushi*; Suzuki, Takenori*; Miura, Taichi*; et al.
Radiation Protection Dosimetry, 115(1-4), p.564 - 568, 2005/12
Times Cited Count：8 Percentile：49.02(Environmental Sciences)The High Intensity Proton Accelerator Project, named as J-PARC, is in progress, aiming at studies on the latest basic science and the advancing nuclear technology. In the project, the high-energy proton accelerator complex of the world highest intensity is under construction. In order to establish a reasonable shielding design, both simplified and detailed design methods were used in the shielding design of J-PARC. This paper reviews the present status of the radiation safety design study for J-PARC.
